Dome Head Fasteners

These fasteners offer probably the simplest method for securing panels with quarter-turn fasteners. Just drill an 8mm hole in the upper and lower panel and mount the spring to the lower panel.

TO MAKE YOUR SELECTION: First measure the total thickness ('T') of the panels you wish to secure (see diagram below) and locate the dimension in the first column of the chart.

TOTAL MATERIAL THICKNESS INCH TOTAL MATERIAL THICKNESS MM DOME HEAD FASTENER
.124 - .1573.1 - 3.9#DZDH1
.174 - .2074.3 - 5.2#DZDH2
.199 - .2325 - 5.8#DZDH3
.224 - .2575.6 - 6.4#DZDH4
.249 - .2826.2 - 7#DZDH5
.274 - .3076.8 - 7.7#DZDH6
.299 - .3327.5 - 8.3#DZDH7
.324 - .3578.1 - 9#DZDH8
.349 - .3828.7 - 9.6#DZDH9