Install this through a 10mm hole in your own brake of clutch fluid reservoir cap to switch on a warning light when your fluid level drops below the lowest float level.
Internal switch contacts make when float is at its lowest position.
(NOTE: Don't forget to redrill the breather hole in the cap if it had one.)
Resistant to all brake and clutch fluids but OK for water too.
28mm float travel. Rubber seal. 300mm fly leads.
Float diameter 26mm.
54mm required depth from inside of cap.
Overall height 70mm.
Weight 14gms.
SWITCH ONLY - CAP NOT INCLUDED.
BRAKE FLUID FLOAT SWITCH #FLSW2
UK Delivery Prices for online orders
Royal Mail 48 *Basket up to £36 < 2kg
£4.99
£2.99
£1.99
Free
£6.98
For international shipping & returns please visit our delivery page.
IVA OK
Mounts through a 22mm hole.
SOLD BY THE METRE