English
You have no items in your shopping cart.

PILLOW BLOCK 19mm I.D.

For 19mm diameter shaft
€16.91
excluding shipping
Part Number: PIL19
Ship to
*
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
+ -

For 19mm diameter shaft. 

Pillow block are used as floating supports for rotating shafts.

This one has a sealed ball bearing with a spherical outer casing

that floats up to 15 degrees in it’s cast iron housing

Can be used as a mid-support for long, 15mm diameter, steering columns. 

Footprint 127mm x 39mm. 65mm high. 

Two 12mm mounting holes at 95mm centres.

Grease nipple.

Two grub screws to secure the shaft to the bearing inner race. 

NOTE: SHAFT NOT INCLUDED

NOTE: SOME STEERING COLUMNS ‘OSCILLATE’ WHEN TURNING.

THIS ITEM IS UNSUITABLE FOR THESE COLUMNS.

ENSURE THAT THE SECTION OF STEERING COLUMN YOU INTEND TO SUPPORT

WITH A PILLOW BLOCK ROTATES ONLY ON IT’S OWN AXIS AND DOES NOT OSCILLATE.

PILLOW BLOCK 19mm I.D. #PIL19

 

 

UK Delivery Prices

Delivery Type Delivery Cost
Total Basket Incl VAT
Estimated Delivery Time
  <£60 <£90 <£120 >£120  

Royal Mail 48 *
Basket up to £36

£1.99       2-3 working days from day of despatch
Royal Mail 48 Tracked * £3.98 Free Free  
Royal Mail 24 Tracked * £4.99 £2.99 Free   Order before 4.00pm Monday to Friday for next working day
DPD (UK Mainland Only) £6.98

£4.99

£2.99

Free

DHL (UK Mainland Only) * £7.99

£5.99

£3.98

Free

 
* Liquids and Aerosols can't be sent via Royal Mail or DHL. Products over 90cm will also be excluded from Royal Mail.

For international shipping & returns please visit our delivery page.

Write your own review
*
*
  • Bad
  • Excellent
*
*
*

For 19mm diameter shaft. 

Pillow block are used as floating supports for rotating shafts.

This one has a sealed ball bearing with a spherical outer casing

that floats up to 15 degrees in it’s cast iron housing

Can be used as a mid-support for long, 15mm diameter, steering columns. 

Footprint 127mm x 39mm. 65mm high. 

Two 12mm mounting holes at 95mm centres.

Grease nipple.

Two grub screws to secure the shaft to the bearing inner race. 

NOTE: SHAFT NOT INCLUDED

NOTE: SOME STEERING COLUMNS ‘OSCILLATE’ WHEN TURNING.

THIS ITEM IS UNSUITABLE FOR THESE COLUMNS.

ENSURE THAT THE SECTION OF STEERING COLUMN YOU INTEND TO SUPPORT

WITH A PILLOW BLOCK ROTATES ONLY ON IT’S OWN AXIS AND DOES NOT OSCILLATE.

PILLOW BLOCK 19mm I.D. #PIL19

 

 

Product tags
You may also be interested in the following product(s)
TW16
Sold by the Metre
IF YOU WANT 5 METRES, ORDER 'QUANTITY 5'
From €0.25
516UNFBN

For use with our steering UJ's.

€2.11
UJD2
Size 80mm x 38mm.
'DD' at both ends.
€39.46
RSP12
SOLD SINGLY
€2.82
SPLINED35019
350mm LONG
€43.69
UJD1
Size 80mm x 38mm.
14mm (9/16") x 36 spline at one end and 'DD' at the other end.
€39.46
DD18
18 INCH LENGTH (457mm)
€16.91
HSH9032

32mm I.D. 42mm O.D.
4" leg length.

€5.29
COP6

SOLD BY THE METRE

€7.05
H9032

32mm ID. 42mm OD. 90º tight bend.
200mm (8") leg length.

€10.92
CDS2064

SOLD BY THE INCH

€1.06
TRMR1

SOLD BY THE METRE

€2.47