A set of two, plated steel, spring-loaded plungers that will push your door (or bonnet, or boot lid) open
when the latch is released.
Fits through a 17mm hole.
Cylinder diameter 16.3mm.
Rubber-tipped plunger travel 20mm.
Mounting plate 25mm x 50mm with two 4mm holes at 38mm centres.
Two, 32mm x 26mm plated steel, self-adhesive pressure plates, washers and fixing screws included.
Maximum rear projection 74mm.
Maximum front projection 35mm.
DOOR POPPER SET #DPOP £10
