ROTARY 2 SPEED WIPER SWITCH Nice quality. Nice action. 2 Speed wiper switch with 'Park' facility.
Mounts through an 11mm hole. Two flats on mounting thread.
Maximum panel thickness 6mm. Knob diameter 30mm.
1/4" Spade Terminals on rear. Rear projection 32mm.
Switch body diameter 34mm. 16 Amp max.
NOTE: Your wiper motor must have two-speed winding and park facility for this switch to work correctly.
You will also require a 5 pin change over relay if you are using with our 2 speed wiper motor.
WIRING: B = +12 volts in. L = Low Speed out. H = High Speed Out. P = Park
2 SPEED ROTARY WIPER SWITCH#WIPSW2