38mm (1.5") ROLL CAGE MIRROR
This very wide-angle mirror is designed to clamp to the front bar of your roll cage.
Multi-adjustable for height and angle.
The curved glass mirror head is a massive 350mm wide x 70mm high.
The 185mm long mounting arms (measured from the centre of the roll bar tube)
are CNC’d from 1/4" billet, anodised aluminium which clamp around the roll bar
by tightening the stainless cap-head screws.
NOTE: This item is extremely fragile and will break if not handled carefully and correctly.
Only mount on a straight run of tubing.
Do not try to bend or reshape any of the brackets.
Ensure that the mirror head is not under any strain when the all the bolts are tightened.
NOTE: Also available for 45mm (1.75") diameter roll cage tube.
38mm ROLL CAGE MIRROR #RCM38