Widely used in the Aircraft Industry, Nut Plates offer a nice alternative
to rivnuts and other captive nut systems.
For fixing two panels together or for making a permanent, retained thread in thin sheet metal.
Just secure the plated-steel, Nut Plate to the underside of the panel with two countersunk rivets,
drill a clearance hole for the screw and it's done.
Perfect panel alignment every time.
The Nut Plate threaded section is slightly deformed to provide a 'locking' grip on your screw.
Available in M3, M4, M5, M6 and M8 threads. Sold in Packs of 5.
M5 NUT PLATES
SIze 25mm x 9mm.
Thread length 4mm
Two 2.4mm holes at 19mm centres.
M5 NUT PLATES Pack of 5 #NPLT5
