Battery Cable Crimping Tool


Crimp from 6mm to 16mm diameter ring terminals.
£25.20
excluding shipping
Part Number: CRPPNC
Order within the next 0.00.00 for fast dispatch today.
Ship to
*
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
+ -

Free UK Delivery

Here's an inexpensive and very simple crimper for battery cable ring terminals between 6mm diameter and 16mm diameter (8 AWG to 4.0 AWG).

Just trim off the cable insulation so that the copper fits fully into the terminal, locate the assembled cable and terminal in the tool, below the sprung-loaded anvil and whack the anvil with a hammer (on a solid surface) until the joint is tight and secure.

Hardened steel jaws and plated anvil.

Weight 685gms.

BATTERY CABLE CRIMPING TOOL #CRPPNC

UK Delivery Prices for online orders

Delivery Type Delivery Cost
Total Basket Incl VAT
  Estimated Delivery Time
  <£60 <£90 <£120 <£180 >£180  

Royal Mail 48 *
Basket up to £36 < 2kg

£1.99         2-3 working days from day of despatch
Royal Mail 48 Tracked * £3.98 Free Free Free  
Royal Mail 24 Tracked * £4.99 £2.99 Free Free   Order before 4.00pm Monday to Friday for next working day
DPD (UK Mainland Only) £6.98

£4.99

£2.99

£1.99

Free

DHL (UK Mainland Only) * £8.99

£6.98

£4.99

£2.99

Free

 
* Liquids and Aerosols can't be sent via Royal Mail or DHL.  Products over 90cm will also be excluded from Royal Mail.  Royal Mail 48 weight limit 2KG.

For international shipping & returns please visit our delivery page.

Existing reviews
Handy tool
Guest 12/7/2022 2:19 PM
Avatar
Ideal for crimping a few battery connections
Was this review helpful? Yes No (0/0)
Right Tool
Paul 5/9/2022 7:23 PM
Avatar
This is an excellent low cost way to attach large ring connectors to cable. Works will all battery cable sizes and as said in previous review ideal for inverter cables
Was this review helpful? Yes No (0/0)
Crimping tool for large cables
Guest 9/24/2020 1:05 PM
Avatar
This is a must have purchase for anyone crimping large diameter cables. Unless you do a lot of this work professionally the professional tools are way too expensive and sometimes due to the need to do the work in situ it is not always possible to have cables made up remotely. I have used this tool for for campervan leisure battery and inverter cables. I have even used it for 75sq mm 10kw inverter cables for an off-grid solar/battery/inverter system. Just make sure that it is placed on a hard surface before used
Was this review helpful? Yes No (1/0)
Write your own review
*
*
  • Bad
  • Excellent

Here's an inexpensive and very simple crimper for battery cable ring terminals between 6mm diameter and 16mm diameter (8 AWG to 4.0 AWG).

Just trim off the cable insulation so that the copper fits fully into the terminal, locate the assembled cable and terminal in the tool, below the sprung-loaded anvil and whack the anvil with a hammer (on a solid surface) until the joint is tight and secure.

Hardened steel jaws and plated anvil.

Weight 685gms.

BATTERY CABLE CRIMPING TOOL #CRPPNC

You may also be interested in the following product(s)
RT8

170 Amps.
£0.60
BCR

SOLD BY THE METRE

£7.20
TW16
Sold by the Metre
IF YOU WANT 5 METRES, ORDER 'QUANTITY 5'
From £0.22
TERRLYL
SOLD SINGLY
£0.48
RT10

170 Amp.
£0.90
BCSR

SOLD BY THE METRE

£6.00
TERRLYS
SOLD SINGLY
£0.34
TW11
Sold by the Metre
IF YOU WANT 5 METRES, ORDER 'QUANTITY 5'
From £0.14
BCB

SOLD BY THE METRE

£7.20
RT816

For 16mm² battery cable.
8mm ring.
£0.60
TERMF2
SOLD SINGLY
£0.18
RT850
£1.20