This, superb value, 115 piece tap and die set is made from high quality alloy steel and is suitable for making and repairing threads in plastics and metals (not stainless).
Each Tap and Die is clearly etched with the diameter and the thread pitch.
The set includes a set of five screw extractors, two thread gauges and five drill bits.
Supplied in a blow-moulded storage case.
CONTAINS ONE EACH TAP AND DIE IN THE FOLLOWING SIZES:
IMPERIAL: 4-40, 5-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4"x20, 1/4"x28, 5/16"x18, 5/16"x24, 3/8"x16, 3/8"x24, 7/16"x14, 7/16"x20, 1/2"x13, 1/2"x20, 9/16"x12, 9/16"x18, 5/8"x11, 5/8"x18, 3/4"x10 and 3/4"x16
METRIC: 2×0.4, 3×0.5, 4×0.7, 5×0.8, 6×1.0, 7×1.0, 8x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.25, 10x1.5, 11x1.5, 12x1.25, 12x1.75, 14x1.5, 14x2, 16x1.5, 16x2, 18x1.5 and 18x2.5.
PIPE THREADS: 1/8"x27 NPT, 1/4"x18 NPT, 1/8"x28 BSP and 1/4"x19 BSP.
2 x BAR-TYPE TAP WRENCHES
1 x T-TYPE TAP WRENCH
2 x DIE HOLDERS
2 x THREAD GAUGES
5 x DRILL BITS: 2.5mm, 3.3mm, 4.2mm, 5.0mm and 6.8mm
5 x SCREW EXTRACTORS
1 x SCREWDRIVER
1 x CENTRE PUNCH
115 PIECE IMPERIAL AND METRIC TAP & DIE SET #TAPDIE115
