FLUSH MOUNTING WHITE LIGHT LED LAMP 'E9' Marked
Neat little lamp. Suitable for rear number plate, interior etc.
Just 25mm x 83mm with 6mm front projection
and max. 12mm rear projection (not including cable).
Rear of lamp fits through a rectangular hole 17mm x 55mm.
Sealed with a nice, chamfered rubber gasket and secured through two 4.3mm,
counterbored holes at 66mm centres.
Black press-in caps cover the screws (Screws not supplied) 500mm long flylead.
WIRING: WHITE = -12v. BROWN = + 12v.
NOTE:: Unusually, on this lamp, the 'E' mark is on the rear of the lamp and
cannot be seen when installed.
LED REAR NUMBER PLATE LAMP #RNOLED9