Search
English
All Categories
    Menu Close

    Balance Bar IVA Locking Kit

    IVA Requirement.

    Part Number: BALLOC

    £7.20
    excluding shipping
    i h

     

    INSTALLATION: Adjust your balance bar to the desired position, slide on the copper sleeve until it

    touches the threaded clevis swivel pin. Fit the  stainless locknut and tighten it gently against the

    copper sleeve. Ensure that the clevis can still float on its pin. 

    With a good quality 2.5mm drill bit, drill through the stainless nut and shaft.

    Press the roll pin into the hole through the nut and shaft.

    NOTE: BALANCE BAR NOT INCLUDED

    BALANCE BAR IVA LOCKING KIT #BALLOC