Heater installations don't come much simpler than this, all-in-one package.
It requires just a hot water feed from your engine and a 12 volt supply.
Maximum dimensions 10" (260mm) wide x 5" (130mm) high x 12" (300mm)
from the front of the control knobs to the back of the valve, yet still has a
remarkable heat output of 4.3 KW.
Simple plumbing - 15mm inlet and outlet.
Maximum air-flow 230 m³/hr through two 72mm, rotating, rocking-vane vents
on the front panel.
Two rotary control knobs on the front panel adjust fan speed and heat level via
the integral flow valve. Simple, two wire electrical connection with a two way spade
connector on a short fly lead.
Fan motor maximum current 5.8 Amps.
With a little ingenuity you could add demist outlets to the plenum box if required.
Weight just 1.9Kg.
ALL IN ONE COMPACT CAR HEATER CAR HEATER #HEAT6