We've designed and produced this vacuum-formed, two part case for our heater matrix.
The outlet side has two 38mm spigots and two 63mm spigots - all supplied capped so you can open any combination of them to suit your installation.
The inlet side has one 75mm hose spigot for connecting to our fan with 75mm ducting.
Simply cut the water inlet and outlet cut-aways on the side of your choice, wrap our #TRMR1 self-adhesive foam strip around the matrix sides and slide it all together.
It takes just minutes. You can bond the two halves together with a few blobs of Polurethane adhesive / sealant if you wish.
Case size (excluding water inlet and outlet and air inlet and outlet spigots) 205mm x 156mm x 80mm. Weight of matrix and case (dry) 795gms.
We've used a Powerfile to grind away the water pipe cut-aways and a hacksaw to cut the ends from the outlets.
ABS HEATER MATRIX CASE #HMCASE
UK Delivery Prices for online orders
Royal Mail 48 *Basket up to £36 < 2kg
£4.99
£2.99
£1.99
Free
£6.98
For international shipping & returns please visit our delivery page.
SOLD BY THE FULLY STRETCHED METRE
NOTE: MAY BE EITHER GREY OR BLACK
DEPENDING ON CURRENT STOCK
SOLD BY THE METRE
INSTALLATION GUIDE IN THE CATALOGUE
To download click on 'Catalogue' above
SOLD SINGLY
SOLD BY THE METRE15mm ID. 22mm OD.
SOLD BY THE FULLY STRETCHED METREIdeal for heating and ventilation.
SOLD BY THE METRE19mm ID. 26mm OD.