look great, but QA issues to be aware of
Paul
24/04/2023 11:18
These consist of an LED with a current-limiting resistor soldered in series, to make them compatible with connecting directly to a 12v supply.
The LED/resistor of your chosen colour are mounted on a plastic body which screws into your chosen switch "sign" - be that fan/fog/indicator etc.
Of the seven I ordered, one didn't work. But I was able to dismantle the LED/resistor part by pushing the wires back into the body, and found that the solder joint was not connected, so this was fixable.
However, each leg of the LED has a short section of shrink-wrap sleeve in place that had not been shrunk. This was also easy to fix.
Based on this, I checked all the other LEDs and found that the heat shrink in every one had not been shrunk, so they were all more vulnerable to vibration damage.
Having fixed everything I'm now pleased with the way they look and work.
Was this review helpful?
Yes
No
(0/0)
Thank you for taking the time to provide feedback on the LED products you purchased. We appreciate your detailed review and are glad to hear that you were able to resolve the issues with the faulty LED and the unshrunk heat shrink sleeves.
We apologise for the inconvenience caused by the non-functional LED and the oversight with the shrink-wrap sleeves. Quality control is important to us, and we will certainly look into these matters to ensure that they are addressed promptly and avoid such issues in the future.
We are pleased to hear that you were able to fix the problems and that you are now satisfied with the appearance and performance of the LEDs. If you have any further questions or concerns, please don't hesitate to contact our customer support team.
Once again, we appreciate your feedback, and we will continue to strive for excellence in our products and services.
