Nicely manufactured from 304 stainless steel.
Dimensions listed are ID but this can be increased or decreased very slightly by
twisting the pipe thus tightening or loosening the interlocking wrap design.
The pipe can be cut with a grinder and welded or brazed to your system.
The minimum bend radii shown are approximate.
Wall thickness approximately 1.5mm.
Maximum available length 2m.
NOTE: THIS ITEM MAY SOMETIMES BE SUPPLIED FULLY COMPRESSED FOR SHIPPING,
THUS REDUCING ITS LENGTH.
EXPANDING IT TO ITS NATURAL STATE WILL RESTORE ITS FULL LENGTH.
STAINLESS FLEXIBLE EXHAUST PIPE 38mm I.D. 41mm O.D.
MINIMUM BEND RADIUS 150mm #SSFEX38
