EXHAUST REPAIR BANDAGE 700°C
Repairs small holes and cracks in exhaust pipes and silencers.
A tub of heat-resistant exhaust paste and 1 metre of 60mm wide ceramic tape.
Clean any loose rust, grease or dirt from your repair area.
Shake the paste tub.
Apply paste to the pipe, then a layer of bandage and paste, alternately as you wrap the repair.
Secure with wire until cured.
Exhaust heat will cure the paste and complete the repair.
NOTE: Not intended as a permanent repair, but as a temporary measure to seal small cracks and holes. Works best on solid straight pipe. Results will vary if used on tight bends, flexible joints etc.
Withstands up to 700 degrees C
EXHAUST REPAIR BANDAGE KIT #EXREP
