165mm maximum length corner to bottom of base.
Moulded plastic body size 116mm x 58mm x 52mm front to back.
Convex glass size 110mm x 50mm.
Aluminium angled stem with a 45mm diameter floating disc base
with three 5mm holes on a 32mm P.C.D.
Loosen the Hex nut to adjust base angle between 25° and 62° from vertical.
Suitable for left or right mounting.
Just insert a 3mm hex key through the small hole in the top to loosen the stalk locking screw.
Rotate the stalk then retighten the stalk retaining screw.
CARBON EFFECT RACE STYLE STALK MIRROR WITH DISC BASE each #M18CADB
SOLD AS A SINGLE MIRROR
CHECK MOUNTING ANGLE AND DIMENSIONS CAREFULLY TO ENSURE THIS MIRROR IS CORRECT FOR YOUR APPLICATION