Existing reviews
Heatmat
Ian 27/11/2023 19:30
Avatar
Good and strong glass fibre backing but the ally coating is a little frail and will rub off in places if abraded or 'caught' with a sharp part. easy to cut and place, but does need high temp contact adhesive, as recommended by CBS.
Was this review helpful? Yes No (0/0)
easier than expected
Guest 09/10/2022 16:33
Avatar
This is more flexible than expected, but do follow the CBS recommendations.  Hopefully it will keep the occupants of my trackday car cooler!
Was this review helpful? Yes No (0/0)
Top Product !
alain 08/11/2020 13:47
Avatar
A must have in every garage : could be used to protect an area while soldering/welding, perfect to protect some parts/area of the engine bay from the header heat. Easy to cut and form.
Was this review helpful? Yes No (0/0)
Top product
Guest 13/07/2020 10:30
Avatar
Great value and top quality. Well packed, arrived in a cardboard tube. Fast delivery.
Was this review helpful? Yes No (0/0)
Easy Application & looks Great
Leighton 23/04/2020 20:00
Avatar
This product is great, easily glued in place using the recommended adhesive looks tidy and reduced all temperature outside of the bonnet. Superb!
Was this review helpful? Yes No (0/0)
Heatmat
Guest 14/02/2019 18:08
Avatar
'Does what it says on the tin'.  I've had to deal with a very compact engine bay, suffering from carburettor overheating after running (ram air cooled in use).  I've used heatmat on the heat shields closest to the manifolds and embossed alloy sheet as additional heat shields around the carb.  This has reduced post-run heat soak to insignifigance.  Heatrmat stuck on with high temp. adhesive as recommended
Was this review helpful? Yes No (0/0)
Write your own review
*
*
  • Bad
  • Excellent