Sealed, reliable solid state internals. 12 volt. Requires separate earth connection to pump body via fixing bolt.
Less than 2 amp current drain.
Will self prime up to 0.6 mtr lift.
Footprint 140mm x 82mm x 85mm high (without unions).
2 bolt fixing at 65mm centres.
Removable, washable internal nylon filter.
Weight 760gm.
Operating temperature range -60 to +43 deg C.
Will pump from 4.5 psi to 5.5 psi.
Flow rate 113 ltrs/hour (30 US gal/hr.)
Union thread size 1/8" npt female. PIPE UNIONS NOT INCLUDED
IMPORTANT NOTE: ALL FUEL PUMPS MUST BE FITTED WITH A PRE-FILTER ON THE INLET SIDE.
RETURNED PUMPS WILL NOT BE REPLACED OR REFUNDED IF FOUND DAMAGED DUE TO DEBRIS.
FACET SILVER TOP ROAD CYLINDRICAL SOLID STATE PUMP #FAC6
