12 volt.
 Reliable solid state internals, no electrical contacts to burn out,
no bearings to wear and no diaphragms to perish.
Less than 2 amp current drain.
Will self prime up to 0.3mtrs lift.
Footprint 80mm x 80mm x 60mm high (without unions).
2 bolt fixing at 65mm centres.
Union thread size 1/8" npt. PIPE UNIONS NOT INCLUDED
Weight 469gm.
Operating temperature range -31 to +55 deg C.
Will pump from 4 psi to 7 psi.
Flow rate 121ltrs/hour (32 US gal/hr.)Â
IMPORTANT NOTE: ALL FUEL PUMPS MUST BE FITTED WITH A PRE-FILTER ON THE INLET SIDE.
RETURNED PUMPS WILL NOT BE REPLACED OR REFUNDED IF FOUND DAMAGED DUE TO DEBRIS.
FACETÂ COMPETITION SOLID STATE CUBE FUEL PUMPÂ #FAC7