#HEAT4 - NEW DESIGN
COMPACT HEATERRequires hot water feed from your engine.
Here’s a single fan compact heater that measures only 6¾" (170mm) wide,
x 5" (130mm) high x 8 1/4" (210mm) front to back
yet still has a remarkable heat output of 3.8 KW!!
Simple plumbing - 15mm inlet and outlet.
Maximum air-flow 170 m³/hr. High efficiency copper core matrix with aluminium fins.
Three speed fan with 300mm fly lead and a 4 pin connector plug
Four, 55m diameter outlet flanges are bolted to the aluminium,
removable front panel which can be easily removed for modification.
The air inlet on the motor housing has a 75mm diameter flange for ducting in fresh air.
There are two 6.8mm holes right through the casing from top to bottom for stud fixing
and there are two, moulded-in, brass, female,M6 inserts in the top and two in the bottom
of the casing allowing multiple mounting options.
Supplied with wiring, connectors, in-line fuse and rotary control switch.
Fan motor maximum current 4.5 Amps.
Weight just 1.7Kg.
COMPACT CAR HEATER#HEAT4