This unique lamp has a row of LED's that illuminate in sequence with each flash.
Each lamp also has a built-in flasher relay so if four are used, front and rear, the wiring is really simple.
They can also be used as a replacement lamp with an existing flasher indicator relay.
‘E4’ Marked.
Surface mount.
260mm x 24mm x 14mm front to back.
Two 4.7mm hidden fixing holes with snap-on covers at 235mm centres.
300mm sealed flylead.
Weight 93 gms.
9 - 33 volts
5 Watts
SEQUENCING AMBER INDICATOR WITH BUILT IN FLASHER RELAY #RL118