FULL SWEEP MECHANICAL WATER TEMPERATURE GAUGE.
270 Degree sweep dial.
Fits in a 52mm hole in your dash.
Bezel diameter 57mm.
Bezel front projection 7mm.
The twelve foot (3.6mtr) plastic covered, copper capillary is pre-fitted to the back of the gauge.
It has a 5/8” UNF male union at the other end to clamp the probe into the engine.
Illuminated display, with 12 and 24 volt bulbs.
Fitting clamp, fixings and instructions included.
MECHANICAL WATER TEMPERATURE GAUGE #WATGAMEC
