Widely used in the Aircraft Industry, Nut Plates offer a nice alternative
to rivnuts and other captive nut systems.
For fixing two panels together or for making a permanent, retained thread in thin sheet metal.
Just secure the plated-steel, Nut Plate to the underside of the panel with two countersunk rivets,
drill a clearance hole for the screw and it's done.
Perfect panel alignment every time.
The Nut Plate threaded section is slightly deformed to provide a 'locking' grip on your screw.
Available in M3, M4, M5 , M6 tand M8 hreads. Sold in Packs of 5.
M6 NUT PLATES
SIze 29mm x 9.8mm.
Thread length 5mm
Two 3.3 mm holes at 22mm centres.
M6 NUT PLATES Pack of 5 #NPLT6