For fixing two panels together or for making a permanent, retained thread in thin sheet metal.
Just secure the plated-steel, Nut Plate to the underside of the panel with two countersunk rivets,
drill a clearance hole for the screw and it's done.
Perfect panel alignment every time.
The Nut Plate threaded section is slightly deformed to provide a 'locking' grip on your screw.
SIze 33mm x 12.5mm.
Thread length 6mm
Two 3.5 mm holes at 26mm centres.
M8 NUT PLATES Pack of 5 #NPLT8