FUEL LEVEL SENDER 12volt / 24volt
An adjustable sender that fits through a 43mm hole in your fuel tank.
Sender flange diameter 71mm.
Five 5.6mm fixing holes at 54mm PCD.
Supplied with two rubber gaskets, a threaded internal fixing ring and five screws and washers.
The 380mm wire float arm can be cut down to suit your installation.
Float arm rotation 80 degrees.
Sender length adjustable between 247mm and 320mm (or less if slider is cut down).
1/4" spade terminal sender connection and 5mm earth tag.
Please check suitability with your instrument before purchasing.
If the sender resistance does not match your gauge you may not get accurate readings.
Resistance 180 Ohms to 10 Ohms.
FUEL TANK SENDER #FUSEND3