Chromed metal construction. Flat glass in a floating, dished glass housing with approximately 50 degrees of angular adjustment in the mirror body.
A diecast arm is rubber-mounted to the mirror body and will rotate 360 degrees. There is a spherical ball joint between the arm and mounting foot that has approximately 80 degrees of angular movement.
The clip-on mount will fit to a vertical windscreen support or door frame of up to 10mm thick using two grub screws.
Two black plastic packing pieces are supplied. With a little enginuity you could remove and modify the clamping plate and replace the two plate-securing screws with studs so that you can surface mount the mirror on a door top or scuttle.
Mirror diameter 100mm. Bullet front to back 110mm. Arm length 50mm. Mounting base footprint 45mm x 30mm.
MIRROR CLIP-ON BULLET MIRROR #MCOBUL
SOLD AS A SINGLE MIRROR
