Dynamat Xtreme Bulk Pack

Xtreme Bulk Pak contains nine 18" x 32" pieces of Dynamat Xtreme covering a total of 36 square feet (3.25 square metres).
£159.60
excluding shipping
Part Number: DYN10455
Order within the next 0.00.00 for fast dispatch today.
Ship to
*
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
+ -

DYNAMAT XTREME is a Black, light-weight, elastomeric, butyl and aluminum vibrational damper

for use on bulkheads, doors, floors, boot, roof and bonnet to reduce road noise and internal resonance.

When applied to a vibrating panel, noise is converted into silent energy.

It is supplied in thin (1.7mm), flexible, easy to cut and mould sheets which conform to curves and

bond easily to sheet metal and other hard surfaces.

You can apply Dynamat in patches (25-50% area coverage) to dampen resonation of a specific panel

or you can apply it over an entire area (such as the floor, doors, or boot) to create a sound barrier and vibrational damper.

Even a small amount of Dynamat can make a big reduction in noise levels.

For example, applying Dynamat to the doors of your vehicle can reduce road noise from 3-6dB. 

Complete coverage of an average vehicle can reduce road noise by as much as 18dB!

We recommend applying Dynamat to any surface you can easily reach such as the doors, rear panels,

bulkheads, floors, roof, boot or under the bonnet. 

Installing Dynamat requires only a few tools:  Craft knife or scissors, roller tool, rags and a solvent- based cleaner.

Applying Dynamat to the panels around your car also prevents panel distortion by stiffening the flimsy sheet metal

or fibreglass into a more solid non-resonant baffle. 

Suitable for use in temperatures between -10°C to +60°C (14°F to+140°F).

Material can withstand temperature extremes between -54°C to +149°C (-65°F to +300°F) and 

is highly resistant to aging. 

Total coverage 36 square feet (3.25 square metres)

  • Dynamat Bulk Pack
  • Contents: (9) 18"x 32" (457mm x 812mm) pieces of Dynamat Xtreme
  • Application: Use on bulkheads, doors, floors, boot, roof and bonnet to lower road noise and internal resonance.
  • New Black Finish
  • Weight 1 Kg per sheet

Dynamat Xtreme Bulk Pak #DYN10455


Acoustic Properties:
The acoustic loss factor "n" is used as a measure of a material's ability to damp structure-borne sound

by stating how much vibrational energy (in steel sheets for instance) is converted to heat rather than sound.

For constructions containing several layers of damping material, the combined loss factor "n comb" is used.

The theoretical maximum loss factor is 1 (no vibration).

An undamped 1mm thick steel panel has a loss factor of roughly 0.001 at 200 Hz.

Dynamat Xtreme applied to that panel would increase the loss factor to 0.417 @ +20°C (+68°F).

Multiple layers of Dynamat Xtreme improve sound damping even more.

Installation:
Use scissors, knife or die to cut Dynamat Xtreme to the desired size and shape before removing the release liner.

Next, remove dust, grease, moisture, and other foreign matter from the application surface.

Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge.

Press the mat firmly into place, using a roller for larger pieces.

The roller reduces the risk of leaving air pockets, which reduce Dynamat's sound damping capacity.

The temperature of the mat and application surface should not be below room temperature during fitting.

Heating the material is not necessary.

Thickness:   0.067" (1.7mm)

UK Delivery Prices for online orders

Delivery Type Delivery Cost
Total Basket Incl VAT
  Estimated Delivery Time
  <£60 <£90 <£120 <£180 >£180  

Royal Mail 48 *
Basket up to £36 < 2kg

£1.99         2-3 working days from day of despatch
Royal Mail 48 Tracked * £3.98 Free Free Free  
Royal Mail 24 Tracked * £4.99 £2.99 Free Free   Order before 4.00pm Monday to Friday for next working day
DPD (UK Mainland Only) £6.98

£4.99

£2.99

£1.99

Free

DHL (UK Mainland Only) * £8.99

£6.98

£4.99

£2.99

Free

 
* Liquids and Aerosols can't be sent via Royal Mail or DHL.  Products over 90cm will also be excluded from Royal Mail.  Royal Mail 48 weight limit 2KG.

For international shipping & returns please visit our delivery page.

Existing reviews
Pricey, but the real deal
Guest 3/19/2023 12:31 PM
Avatar
Seems expensive compared to non-branded alternatives, but easy to work with and very effective.
Was this review helpful? Yes No (0/0)
Write your own review
*
*
  • Bad
  • Excellent

DYNAMAT XTREME is a Black, light-weight, elastomeric, butyl and aluminum vibrational damper

for use on bulkheads, doors, floors, boot, roof and bonnet to reduce road noise and internal resonance.

When applied to a vibrating panel, noise is converted into silent energy.

It is supplied in thin (1.7mm), flexible, easy to cut and mould sheets which conform to curves and

bond easily to sheet metal and other hard surfaces.

You can apply Dynamat in patches (25-50% area coverage) to dampen resonation of a specific panel

or you can apply it over an entire area (such as the floor, doors, or boot) to create a sound barrier and vibrational damper.

Even a small amount of Dynamat can make a big reduction in noise levels.

For example, applying Dynamat to the doors of your vehicle can reduce road noise from 3-6dB. 

Complete coverage of an average vehicle can reduce road noise by as much as 18dB!

We recommend applying Dynamat to any surface you can easily reach such as the doors, rear panels,

bulkheads, floors, roof, boot or under the bonnet. 

Installing Dynamat requires only a few tools:  Craft knife or scissors, roller tool, rags and a solvent- based cleaner.

Applying Dynamat to the panels around your car also prevents panel distortion by stiffening the flimsy sheet metal

or fibreglass into a more solid non-resonant baffle. 

Suitable for use in temperatures between -10°C to +60°C (14°F to+140°F).

Material can withstand temperature extremes between -54°C to +149°C (-65°F to +300°F) and 

is highly resistant to aging. 

Total coverage 36 square feet (3.25 square metres)

  • Dynamat Bulk Pack
  • Contents: (9) 18"x 32" (457mm x 812mm) pieces of Dynamat Xtreme
  • Application: Use on bulkheads, doors, floors, boot, roof and bonnet to lower road noise and internal resonance.
  • New Black Finish
  • Weight 1 Kg per sheet

Dynamat Xtreme Bulk Pak #DYN10455


Acoustic Properties:
The acoustic loss factor "n" is used as a measure of a material's ability to damp structure-borne sound

by stating how much vibrational energy (in steel sheets for instance) is converted to heat rather than sound.

For constructions containing several layers of damping material, the combined loss factor "n comb" is used.

The theoretical maximum loss factor is 1 (no vibration).

An undamped 1mm thick steel panel has a loss factor of roughly 0.001 at 200 Hz.

Dynamat Xtreme applied to that panel would increase the loss factor to 0.417 @ +20°C (+68°F).

Multiple layers of Dynamat Xtreme improve sound damping even more.

Installation:
Use scissors, knife or die to cut Dynamat Xtreme to the desired size and shape before removing the release liner.

Next, remove dust, grease, moisture, and other foreign matter from the application surface.

Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge.

Press the mat firmly into place, using a roller for larger pieces.

The roller reduces the risk of leaving air pockets, which reduce Dynamat's sound damping capacity.

The temperature of the mat and application surface should not be below room temperature during fitting.

Heating the material is not necessary.

Thickness:   0.067" (1.7mm)

Product tags
You may also be interested in the following product(s)
TW16
Sold by the Metre
IF YOU WANT 5 METRES, ORDER 'QUANTITY 5'
From £0.22
TERRLYL
SOLD SINGLY
£0.48
DYN13100
10 Rolls per pack
£14.40
DYN11102

Total Coverage:12 ft² (1.1 m²)

£82.80
DYN10007

2" wide rubber roller ensures good adhesion on curved and irregular surfaces.

£23.40
TW25
Sold by the Metre
IF YOU WANT 5 METRES, ORDER 'QUANTITY 5'
From £0.42
DYN11101

Total Coverage:12 ft² (1.1m²)

£57.60
DYN10005

For ensuring good adhesion on simple applications on flat surfaces.

£15.00
DYN21100
1 SHEET, 3/8" THICK, 32" x 54"
£124.80
TERMF2
SOLD SINGLY
£0.18
RT10

170 Amp.
£0.90
DYN11103

Total Coverage:12 square feet (1.1 square metres)

£100.80