This switch is commonly installed in the +12 volt feed wire to an electric fuel pump, connected to the closed position contacts (NC).
In the event of a crash or hard shock, the switch contacts will open, shutting down the fuel pump and switching on a warning light telling you that the switch has been activated or even a GPS distress locator.
To reset the switch just press the rubber diaphragm.
10 Amp contact rating.
Use with a relay if your fuel pump load is greater than 10 Amps.
360 degree sensing.
Used on many BL vehicles, Part No: WQT100030
Use our connector plug #NASPLG3
NOTE: THIS SWITCH MUST BE MOUNTED ON A VERTICAL PANEL WITH THE RUBBER DIAPHRAGM FACING UPWARDS
INERTIA SAFETY SWITCH #INERSW
UK Delivery Prices for online orders
Royal Mail 48 *Basket up to £36 < 2kg
£4.99
£2.99
£1.99
Free
£6.98
For international shipping & returns please visit our delivery page.
SOLD BY THE METRE
SOLD BY THE INCH