For 15mm diameter shaft.
Pillow block are used as floating supports for rotating shafts.
This one has a sealed ball bearing with a spherical outer casing
that floats up to 15 degrees in it’s cast iron housing (Colour may vary).
Can be used as a mid-support for long, 15mm diameter, steering columns.
Footprint 129mm x 38mm. 67mm high.
Two 11mm mounting holes at 95mm centres.
Grease nipple.
Weight 746gms
Two grub screws to secure the shaft to the bearing inner race.
NOTE: SHAFT NOT INCLUDED
NOTE: SOME STEERING COLUMNS ‘OSCILLATE’ WHEN TURNING.
THIS ITEM IS UNSUITABLE FOR THESE COLUMNS.
ENSURE THAT THE SECTION OF STEERING COLUMN YOU INTEND TO SUPPORT
WITH A PILLOW BLOCK ROTATES ONLY ON IT’S OWN AXIS AND DOES NOT OSCILLATE.
PILLOW BLOCK 15mm I.D. #PIL15